3Com 11.1 manual SR Service Parameters, AllRoutes, Place this page in front of Chapter

69

AllRoutes

SR SERVICE PARAMETERS

11.1Release Notes, Reference for NETBuilder Family Software

Place this page in front of Chapter 69.

Syntax FLush [!<port> !*] -SR AllRoutes [Dec Hex] [<Transparent Null route

segment>] [Discover Static]

SHow [!<port> !*] -SR AllRoutes [Dec Hex] [<Transparent Null route segment>] [Discover Static] [<count>]

SHowDefault [!<port> !*] -SR AllRoutes [Dec Hex]

Default All routes in the routing table in decimal format

Description The AllRoutes parameter allows routes in the routing table to be flushed or displayed in decimal or hexadecimal format. The SHowDefault command displays static routes defined by the ADD -SR ROUte command. The SHow command displays static and discovered routes.

Dynamically learned routes used by LLC2 do not appear in the routing table. You cannot display, flush, or delete RIFs used by LLC2.

Values	Dec Hex	Specifies whether decimal or hexadecimal format is used to enter
		and display routes. Decimal is the default format.
	<Transparent	Limits the routes displayed or flushed to only Transparent routes,
	Null	Null routes, or routes that contain the entered route segment.
	route segment>	A route segment is a series of alternating ring and bridge
		numbers:
		:<ring number> & <bridge number>
		The colon (:) precedes the ring number; the ampersand (&)
		precedes the bridge number. The following is an example of a
		route segment where the frame travels from ring 25 via bridge 2
		to ring 4:
		:25&2:4
	Discover Static	Discover specifies only dynamic routes learned through the route
		discovery process are flushed or displayed. Static specifies only
		manually configured routes using the ADD ROUte command are
		flushed or displayed.
	<count>	Specifies the number of entries to be displayed.