Manuals / 3Com / Kitchen Appliance / Dishwasher

3Com 206380-A manual Operating Environments, Cable Requirements, Fast Ethernet Cables 100 Mb/s

Models: 206380-A

1 80

Download 80 pages 55.59 Kb

Page 22

Operating Environments

Installation and Reference for the BayStack 22 PC Card Adapter

Operating Environments

The BayStack 22 PC Card Adopter supports the following operating systems:

•Microsoft Windows NT 3.51, 4.0

•Microsoft Windows 95, Windows 98

•Microsoft LAN Manager 2.x

•Microsoft Windows for Workgroups 3.11

•Microsoft Windows 3.1

•Novell NetWare 3.x, 4.x

•Lantastic 6.0

•IBM OS/2 Warp Version 3

Cable Requirements

You can use Category 5 (Cat 5) Ethernet cables for 10 Mb/s and 100 Mb/s network connections to the BayStack 22 PC Card Adopter.

Use the following guidelines when using Cat 5 cables:

•Maximum length between a workstation and a hub is 100 meters (m).

•Maximum length between two hubs is 10 m.

•Maximum length between two hubs that are functioning as Ethernet Class 2 repeaters is 100 m.

•Maximum total length between two workstations is 205 m.

Fast Ethernet Cables (100 Mb/s)

You must use a Cat 5 straight-through cable with one RJ-45 connector on each end for 100 Mb/s Ethernet connections. Do not use a crossover cable.

Ethernet Cables (10 Mb/s)

You can use Cat 3, Cat 4, or Cat 5 unshielded twisted pair (UTP) cable or an EIA/TIA-568 100-ohm shielded twisted pair (STP) cable for 10 Mb/s Ethernet connections. You must use a straight-through cable with an RJ-45 connector on each end. Do not use a crossover cable.

1-6

206380-A

Image 22

3Com 206380-A manual Operating Environments, Cable Requirements, Fast Ethernet Cables 100 Mb/s, Ethernet Cables 10 Mb/s

Contents

Part No. 206380-A September 4401 Great America Parkway Santa Clara, CAEN 55 022 Statement Copyright 1999 Nortel NetworksTrademarks EC Declaration of ConformityElectromagnetic Interference EMI Statement Wichtige Sicherheitshinweise Restricted Rights Legend Statement of ConditionsPage 7.Term and termination. This license is effective until terminated however, all of the restrictions with respect to viii 206380-APreface ContentsHardware Installation ChapterTechnical Specifications Chapter Software InstallationTroubleshooting ChapterFigures 3-17 Tables 206380-A Before You Begin PrefaceText Conventions How to Get Help Technical PublicationsChapter Introduction Product FeaturesBayStack 22 PC Card Adapter Overview 68-PinConnector Product DescriptionBayStack 22 Network Card Media Coupler 15-PinConnectorRJ-45Ethernet Port LEDs System Requirements Fast Ethernet Cables 100 Mb/s Operating EnvironmentsCable Requirements Ethernet Cables 10 Mb/sIntroduction Typical ApplicationsFigure 1-4.BayStack 22 Network Card Installation 206380-AFigure 1-5.Typical Application Chapter Hardware Installation Package Contents4.Connect the media coupler to the network card Installing the BayStack 22 PC Card Adapter1.Shut down the computer 7.Be sure the network card is firmly secured2.Double-clickPC Card PCMCIA Removing the BayStack 22 PC Card Adapter11.Turn on power to the laptop 4.Click StopPage Chapter Software Installation Preinstallation Figure 3-2.New Hardware Found Window-BayStack22 Software InstallationFigure 3-3.Update Device Driver Wizard Dialog Box Network Card4.Insert the Windows 95 CD as indicated Update Device Driver Wizard3.Click Next Figure 3-4.Copying Files Dialog Box5.Click Finish Software InstallationFigure 3-6.System Settings Change Dialog Box 6.Click OKConfiguring the Windows 95 Environment 2.Double-clickNetwork3.Select Properties 9.Click OK 6.Click OK7.Click the Resources tab 11.Click Add15.In the Manufacturers list, select Microsoft 12.Select TCP/IP13.Select Protocol 14.Click Add Figure 3-11.Select Network Protocol Dialog Box19.Select Properties 17.Click OK 18.Return to the Configuration tab16.In the Network Protocols list, select TCP/IP 20.Select the IP Address tab25.Click OK 23.Click OK26.Remove the CD from the CD drive 27.Click Yes Figure 3-15.Add New Hardware Wizard Dialog Box 3-123-13 Software Installation2.Click Next 206380-A3-14 3.Click Next5.Select CD-ROMdrive 206380-A7.Click Next Software Installation6.Click Next Figure 3-19.Insert Disk Message8.Click OK 11.Click OK Figure 3-22.System Settings Change Dialog Box12.Click Finish 13.Remove the CD from the CD drive 14.Click Yes Configuring the Windows 98 Environment2.Double-clickNetwork 5.Select the Advanced tab Software Installation4.Click Properties 6.In the Property list, select Connection TypeFigure 3-25.Access Control Tab 10.Select the Access Control tab Figure11.Select Share-levelaccess control 12.Click OK 8.Click OK3.Select the Resources tab Figure Configuring the Interrupt Request2.Double-clickSystem 4.Clear the “Use automatic s ettings” box9.Click OK 6.Click Change Setting8.Click OK 10.Click Yes3.Double-clickNetwork 4.Select the Adapters tab FigureFigure 3-29.Select Network Adapter Dialog Box 5.Click Add6.Click Have Disk Figure 3-30.Insert Disk Dialog Box10.Select the BayStack 22 PC Card Adapter Software Installation9.Click OK Figure 3-31.Select OEM Option Dialog Box11.Click OK 10 Mb/s Ethernet hubs2.Double-clickNetwork Configuring the Windows NT Environment3.Select the Bindings tab Figure Figure 3-34.Bindings Tab-AllAdapters Selection 4.Select all adapters Figure6.Click OK 3-289.Click OK Software Installation7.Select the IP address tab Figure Figure 3-35.IP Address Tab3-30 13.Click OKFigure 3-36.DNS Tab 206380-A16.Click OK 17.Restart your system if prompted Software Installation14.Select the WINS Address tab Figure Figure 3-37.WINS Address Tab\NETWARE\SERVER\4.X\MSM.NLM BayStack 22 PC Card Adapter\NETWARE\SERVER\ETHERTSM.NLM 6.Enter the following syntax \ENABLER\B22ENA10.EXE5.Access a DOS prompt screen 8.Type16.Press Enter 12.Press Enter14.Press Enter 18.Press F3 to specify another path or driveSpecifying Driver Parameters 27.Type exit28.In the DOS prompt, type server 2.Press Enter8.Type exit 3.Access a DOS prompt screen7.Type down 9.In the DOS prompt, type server4.Enter the following syntax 3-38 7.Press EnterYou can now log in to your network 206380-AChapter Troubleshooting Diagnostic LEDsHardware Issues Software IssuesTroubleshooting Page Appendix A Technical Specifications Product SpecificationsLED Indicators Software DriversTechnical Specifications Table A-1Appendix B Novell NetWare Reference Information Novell NetWare Server FilesAUTO.EXEC.NCF File Parameters Sample AUTOEXEC.NCF FilesFRAME Parameter LOAD B22LAN10 FRAME=ETHERNET INT ParameterPORT Parameter LOAD B22LAN10 FRAME=ETHERNETClient Files Novell NetWare Client FilesS10, S10FD, S100, S100FD Parameters NET.CFG File Parameters NET.CFG Files and ParametersSample NET.CFG File PORT ParameterS10/S10FD/S100/S100FD Parameters NWAY ParameterTable B-4 Numbers IndexIndex-1 Index-2