Software Installation
4.Copy the following file from the BayStack 22 PCMCIA Card Adapter Software & Documentation CD to the root directory.
•\ENABLER\B22ENA10.EXE
You can also run the BS22ENA10.EXE program from the BayStack 22 PCMCIA Card Adapter Software & Documentation CD instead of copying the program to your root directory.
5.Access a DOS prompt screen.
From the DOS prompt you must run the BS22ENA10.EXE program before installing the BayStack 22 network driver.
6.Enter the following syntax:
B22ENA10 [/IRQ:x][/IOP:xxx] where:
•IRQ is the interrupt number used specifically for the BayStack 22 network card. This number must not be used by any other device in the system. The default IRQ value is 3.
•IOP is the starting Input/Output (I/O) port address, in hexadecimal format. The BayStack 22 network card requires 32 consecutive free I/O port addresses. The default IOP value is 0x300.
For example, the following command enables a BayStack 22 network card having an IRQ value of 5 and an IOP value of 300:
B22ENA10 /IRQ:5 /IOP:300
7.Change to the Novell NetWare server directory. For instance, type the command:
CD\NWSERVER
8.Type:
SERVER
9.Press Enter.
10.At the server prompt, enter:
LOAD INSTALL
The NetWare Server Installation Utility loads.
11.From the Installation Options menu, select Driver options.
