3Com 206380-A manual Select Properties

Software Installation

3.Select Properties.

The Properties dialog box opens. The Advanced tab is displayed by default (Figure 3-8).

Figure 3-8. Properties Dialog Box

4.In the Property list, select Connection Type. The AutoSense value is displayed by default.

5.In the Value list, select from the following connection speed types:

•AutoSense (Use this setting if you want the RJ-45 port on the media coupler to use the fastest speed supported by the attached device.)

•100BASE-TX for 100 Mb/s connections

•100BASE-TX or 10BASE-T full-duplex mode, for 10 and 100 Mb/s switch connections

•10BASE-T twisted pair for 10 Mb/s connections

206380-A 3-7