3Com 206380-A manual Novell NetWare Client Files, S10, S10FD, S100, S100FD Parameters

Installation and Reference for the BayStack 22 PC Card Adapter

S10, S10FD, S100, S100FD Parameters

The S10, S10FD, S100, S100FD parameters specify the connection type of the BayStack 22 network card. The connection type includes transmission speed (10 or 100 Mb/s) and full- or half-duplex operation. These parameters are mutually exclusive; you can select only one parameter at a time from the command line. If you do not select any of these parameters, the default connection type is autonegotiation. Table B-2 describes each parameter.

Table B-2.	Server Connection Type Parameters
Parameter		Connection Type
S10		10	Mb/s, half-duplex
S10FD		10	Mb/s, full-duplex
S100		100		Mb/s, half-duplex
S100FD		100		Mb/s, full-duplex

The following is an example of a connection type parameter set to 10 Mb/s transmission speed and full-duplex mode:

LOAD B22LAN10 INT=3 PORT=300 FRAME=ETHERNET_802.2 S10FD

Novell NetWare Client Files

This section provides information about client and NET.CFG files.

Client Files

Table B-3 briefly describes the files you use when installing the BayStack 22 network driver into your Novell NetWare client.

Table B-3.	Client Files
Command	Description
LSL.COM	Supports the OSI link support layer
B22ODI10.COM	Client BayStack 22 network driver file
IPXODI.COM	Default protocol stack
NETX.EXE	Server connection
NET.CFG	Optional configuration file

B-4 206380-A