Manuals / 3Com / Kitchen Appliance / Dishwasher

3Com 206380-A manual Type exit, In the DOS prompt, type server, Specifying Driver Parameters

Models: 206380-A

1 80

Download 80 pages 55.59 Kb

Page 63

27.Type: exit

Software Installation

27.Type: exit

Your system returns to the DOS prompt.

28.In the DOS prompt, type: server

The BayStack 22 network card and the server on the Novell NetWare network open and are functioning.

Note: Each time you reboot your server, you must run the B22ENA10.EXE program to enable the BayStack 22 network card.

Specifying Driver Parameters

The BayStack 22 network driver installs with default parameters. You can set specific driver parameters for the driver if you do not want to use the default settings.

To set specific driver parameters:

1.From the Board BayStack 22 (Driver B22LAN10) Actions menu, select “Select/Modify driver parameters and protocols.”

2.Press Enter.

The default protocol is IPX. You can also select TCP/IP or AppleTalk.

3.Select a protocol from the available options.

4.Specify the slot number (slot#).

5.Select “Save parameter and load select driver.”

If you select the IPX protocol, the network number (network #) is randomly generated.

6.Press Enter at each of the following four prompts:

•802.3

•802.2

•SNAP

•Ethernet II

206380-A

3-35

Image 63

3Com 206380-A manual Type exit, In the DOS prompt, type server, Specifying Driver Parameters, Press Enter

Contents

4401 Great America Parkway Santa Clara, CA Part No. 206380-A SeptemberEC Declaration of Conformity Copyright 1999 Nortel NetworksTrademarks EN 55 022 StatementElectromagnetic Interference EMI Statement Wichtige Sicherheitshinweise Statement of Conditions Restricted Rights LegendPage 7.Term and termination. This license is effective until terminated however, all of the restrictions with respect to 206380-A viiiChapter ContentsHardware Installation PrefaceChapter Chapter Software InstallationTroubleshooting Technical SpecificationsFigures 3-17 Tables 206380-A Preface Before You BeginText Conventions Technical Publications How to Get HelpProduct Features Chapter IntroductionBayStack 22 PC Card Adapter Overview Product Description 68-PinConnectorBayStack 22 Network Card 15-PinConnector Media CouplerRJ-45Ethernet Port LEDs System Requirements Ethernet Cables 10 Mb/s Operating EnvironmentsCable Requirements Fast Ethernet Cables 100 Mb/s206380-A Typical ApplicationsFigure 1-4.BayStack 22 Network Card Installation IntroductionFigure 1-5.Typical Application Package Contents Chapter Hardware Installation7.Be sure the network card is firmly secured Installing the BayStack 22 PC Card Adapter1.Shut down the computer 4.Connect the media coupler to the network card4.Click Stop Removing the BayStack 22 PC Card Adapter11.Turn on power to the laptop 2.Double-clickPC Card PCMCIAPage Chapter Software Installation Preinstallation Network Card Software InstallationFigure 3-3.Update Device Driver Wizard Dialog Box Figure 3-2.New Hardware Found Window-BayStack22Figure 3-4.Copying Files Dialog Box Update Device Driver Wizard3.Click Next 4.Insert the Windows 95 CD as indicated6.Click OK Software InstallationFigure 3-6.System Settings Change Dialog Box 5.Click Finish2.Double-clickNetwork Configuring the Windows 95 Environment3.Select Properties 11.Click Add 6.Click OK7.Click the Resources tab 9.Click OKFigure 3-11.Select Network Protocol Dialog Box 12.Select TCP/IP13.Select Protocol 14.Click Add 15.In the Manufacturers list, select Microsoft20.Select the IP Address tab 17.Click OK 18.Return to the Configuration tab16.In the Network Protocols list, select TCP/IP 19.Select Properties23.Click OK 25.Click OK26.Remove the CD from the CD drive 27.Click Yes 3-12 Figure 3-15.Add New Hardware Wizard Dialog Box206380-A Software Installation2.Click Next 3-13206380-A 3.Click Next5.Select CD-ROMdrive 3-14Figure 3-19.Insert Disk Message Software Installation6.Click Next 7.Click Next8.Click OK Figure 3-22.System Settings Change Dialog Box 11.Click OK12.Click Finish Configuring the Windows 98 Environment 13.Remove the CD from the CD drive 14.Click Yes2.Double-clickNetwork 6.In the Property list, select Connection Type Software Installation4.Click Properties 5.Select the Advanced tab8.Click OK 10.Select the Access Control tab Figure11.Select Share-levelaccess control 12.Click OK Figure 3-25.Access Control Tab4.Clear the “Use automatic s ettings” box Configuring the Interrupt Request2.Double-clickSystem 3.Select the Resources tab Figure10.Click Yes 6.Click Change Setting8.Click OK 9.Click OK4.Select the Adapters tab Figure 3.Double-clickNetworkFigure 3-30.Insert Disk Dialog Box 5.Click Add6.Click Have Disk Figure 3-29.Select Network Adapter Dialog BoxFigure 3-31.Select OEM Option Dialog Box Software Installation9.Click OK 10.Select the BayStack 22 PC Card Adapter10 Mb/s Ethernet hubs 11.Click OKConfiguring the Windows NT Environment 2.Double-clickNetwork3.Select the Bindings tab Figure 3-28 4.Select all adapters Figure6.Click OK Figure 3-34.Bindings Tab-AllAdapters SelectionFigure 3-35.IP Address Tab Software Installation7.Select the IP address tab Figure 9.Click OK206380-A 13.Click OKFigure 3-36.DNS Tab 3-30Figure 3-37.WINS Address Tab Software Installation14.Select the WINS Address tab Figure 16.Click OK 17.Restart your system if promptedBayStack 22 PC Card Adapter \NETWARE\SERVER\4.X\MSM.NLM\NETWARE\SERVER\ETHERTSM.NLM 8.Type \ENABLER\B22ENA10.EXE5.Access a DOS prompt screen 6.Enter the following syntax18.Press F3 to specify another path or drive 12.Press Enter14.Press Enter 16.Press Enter2.Press Enter 27.Type exit28.In the DOS prompt, type server Specifying Driver Parameters9.In the DOS prompt, type server 3.Access a DOS prompt screen7.Type down 8.Type exit4.Enter the following syntax 206380-A 7.Press EnterYou can now log in to your network 3-38Diagnostic LEDs Chapter TroubleshootingSoftware Issues Hardware IssuesTroubleshooting Page Product Specifications Appendix A Technical SpecificationsTable A-1 Software DriversTechnical Specifications LED IndicatorsNovell NetWare Server Files Appendix B Novell NetWare Reference InformationSample AUTOEXEC.NCF Files AUTO.EXEC.NCF File ParametersFRAME Parameter LOAD B22LAN10 FRAME=ETHERNET INT ParameterPORT Parameter LOAD B22LAN10 FRAME=ETHERNETNovell NetWare Client Files Client FilesS10, S10FD, S100, S100FD Parameters PORT Parameter NET.CFG Files and ParametersSample NET.CFG File NET.CFG File ParametersNWAY Parameter S10/S10FD/S100/S100FD ParametersTable B-4 Index NumbersIndex-1 Index-2