Manuals / 3Com / Kitchen Appliance / Dishwasher

3Com 206380-A Software Drivers, Table A-1, Technical Specifications, Table A-2, Network Interface

Models: 206380-A

1 80

Download 80 pages 55.59 Kb

Page 72

Network Interface

Installation and Reference for the BayStack 22 PC Card Adapter

Table A-1.	Technical Specifications

Network Interface
10BASE-T:	RJ-45	(UTP Cable, Categories 3, 4, 5)
100BASE-TX:	RJ-45	(UTP Cable, Category 5)
Data Interface	32-bit bus-mastering PCI
I/O Address	Detected by BIOS or Card Service
System Clock	20 to 33 MHz
Interrupt	INT A, mapping to BIOS IRQ setup
LED Indicators	10 Mb/s, 100 Mb/s, Activity

Software Drivers

Table A-2 lists the available software drivers for the BayStack 22 network card. Refer to Chapter 3, “Software Installation ,” for installation instructions for the Windows-based drivers. Refer to the README files associated with other drivers for installation instructions.

Table A-2.	Available Software Drivers

Driver		Compatible Operating Systems

Network Device Interface		Microsoft Windows 95, Windows 98
Specifications (NDIS)		Microsoft Windows NT 3.51, 4.0
		Microsoft Windows for Workgroups 3.11
		Microsoft LAN Manager 2.x
		Banyan VINES
		DEC Pathworks
		IBM TCP/IP for DOS
		LAN Support program
		SUN PC-NFS
NetWare Open Data-Link		Novell NetWare 3.x, 4.x
Interface (ODI)		NetWare LAN Workplace TCP/IP
		Novell LAN Analyzer for NetWare
		Novell Personal NetWare
Packet		IFTP PC/TCP
		NCSA TCP/IP

A-2

206380-A

Image 72

3Com 206380-A Table A-1, Technical Specifications, Table A-2, Available Software Drivers, Network Interface, Interrupt

Contents

Part No. 206380-A September 4401 Great America Parkway Santa Clara, CACopyright 1999 Nortel Networks TrademarksEN 55 022 Statement EC Declaration of ConformityElectromagnetic Interference EMI Statement Wichtige Sicherheitshinweise Restricted Rights Legend Statement of ConditionsPage 7.Term and termination. This license is effective until terminated however, all of the restrictions with respect to viii 206380-AContents Hardware InstallationPreface ChapterChapter Software Installation TroubleshootingTechnical Specifications ChapterFigures 3-17 Tables 206380-A Preface Before You BeginText Conventions How to Get Help Technical PublicationsProduct Features Chapter IntroductionBayStack 22 PC Card Adapter Overview Product Description 68-PinConnectorBayStack 22 Network Card 15-PinConnector Media CouplerRJ-45Ethernet Port LEDs System Requirements Operating Environments Cable RequirementsFast Ethernet Cables 100 Mb/s Ethernet Cables 10 Mb/sTypical Applications Figure 1-4.BayStack 22 Network Card InstallationIntroduction 206380-AFigure 1-5.Typical Application Chapter Hardware Installation Package ContentsInstalling the BayStack 22 PC Card Adapter 1.Shut down the computer4.Connect the media coupler to the network card 7.Be sure the network card is firmly securedRemoving the BayStack 22 PC Card Adapter 11.Turn on power to the laptop2.Double-clickPC Card PCMCIA 4.Click StopPage Chapter Software Installation Preinstallation Software Installation Figure 3-3.Update Device Driver Wizard Dialog BoxFigure 3-2.New Hardware Found Window-BayStack22 Network CardUpdate Device Driver Wizard 3.Click Next4.Insert the Windows 95 CD as indicated Figure 3-4.Copying Files Dialog BoxSoftware Installation Figure 3-6.System Settings Change Dialog Box5.Click Finish 6.Click OKConfiguring the Windows 95 Environment 2.Double-clickNetwork3.Select Properties 6.Click OK 7.Click the Resources tab9.Click OK 11.Click Add12.Select TCP/IP 13.Select Protocol 14.Click Add15.In the Manufacturers list, select Microsoft Figure 3-11.Select Network Protocol Dialog Box17.Click OK 18.Return to the Configuration tab 16.In the Network Protocols list, select TCP/IP19.Select Properties 20.Select the IP Address tab23.Click OK 25.Click OK26.Remove the CD from the CD drive 27.Click Yes Figure 3-15.Add New Hardware Wizard Dialog Box 3-12Software Installation 2.Click Next3-13 206380-A3.Click Next 5.Select CD-ROMdrive3-14 206380-ASoftware Installation 6.Click Next7.Click Next Figure 3-19.Insert Disk Message8.Click OK Figure 3-22.System Settings Change Dialog Box 11.Click OK12.Click Finish Configuring the Windows 98 Environment 13.Remove the CD from the CD drive 14.Click Yes2.Double-clickNetwork Software Installation 4.Click Properties5.Select the Advanced tab 6.In the Property list, select Connection Type10.Select the Access Control tab Figure 11.Select Share-levelaccess control 12.Click OKFigure 3-25.Access Control Tab 8.Click OKConfiguring the Interrupt Request 2.Double-clickSystem3.Select the Resources tab Figure 4.Clear the “Use automatic s ettings” box6.Click Change Setting 8.Click OK9.Click OK 10.Click Yes3.Double-clickNetwork 4.Select the Adapters tab Figure5.Click Add 6.Click Have DiskFigure 3-29.Select Network Adapter Dialog Box Figure 3-30.Insert Disk Dialog BoxSoftware Installation 9.Click OK10.Select the BayStack 22 PC Card Adapter Figure 3-31.Select OEM Option Dialog Box11.Click OK 10 Mb/s Ethernet hubsConfiguring the Windows NT Environment 2.Double-clickNetwork3.Select the Bindings tab Figure 4.Select all adapters Figure 6.Click OKFigure 3-34.Bindings Tab-AllAdapters Selection 3-28Software Installation 7.Select the IP address tab Figure9.Click OK Figure 3-35.IP Address Tab13.Click OK Figure 3-36.DNS Tab3-30 206380-ASoftware Installation 14.Select the WINS Address tab Figure16.Click OK 17.Restart your system if prompted Figure 3-37.WINS Address TabBayStack 22 PC Card Adapter \NETWARE\SERVER\4.X\MSM.NLM\NETWARE\SERVER\ETHERTSM.NLM \ENABLER\B22ENA10.EXE 5.Access a DOS prompt screen6.Enter the following syntax 8.Type12.Press Enter 14.Press Enter16.Press Enter 18.Press F3 to specify another path or drive27.Type exit 28.In the DOS prompt, type serverSpecifying Driver Parameters 2.Press Enter3.Access a DOS prompt screen 7.Type down8.Type exit 9.In the DOS prompt, type server4.Enter the following syntax 7.Press Enter You can now log in to your network3-38 206380-AChapter Troubleshooting Diagnostic LEDsHardware Issues Software IssuesTroubleshooting Page Appendix A Technical Specifications Product SpecificationsSoftware Drivers Technical SpecificationsLED Indicators Table A-1Appendix B Novell NetWare Reference Information Novell NetWare Server FilesSample AUTOEXEC.NCF Files AUTO.EXEC.NCF File ParametersFRAME Parameter INT Parameter PORT ParameterLOAD B22LAN10 FRAME=ETHERNET LOAD B22LAN10 FRAME=ETHERNETNovell NetWare Client Files Client FilesS10, S10FD, S100, S100FD Parameters NET.CFG Files and Parameters Sample NET.CFG FileNET.CFG File Parameters PORT ParameterNWAY Parameter S10/S10FD/S100/S100FD ParametersTable B-4 Index NumbersIndex-1 Index-2