3Com 206380-A manual Click OK, 10 Mb/s Ethernet hubs

Installation and Reference for the BayStack 22 PC Card Adapter

11.Click OK.

The Windows NT Configuration dialog box opens (Figure 3-32).

Figure 3-32. Windows NT Configuration Dialog Box

Set the following configuration parameters, or accept the default settings:

•IRQ level—Interrupt request level. IRQ Level 3 is the default.

•I/O Port Address—Input/Output memory address for the laptop computer. The BayStack 22 network driver installation for Windows NT does not automatically specifyn this address. You must configure it manually.

•Connection Type—Select one of the following settings:

—AutoSense—Select the default AutoSense setting if you want the port to use the fastest speed supported by the attached device.

—100 or 10 half-duplex mode—Use these settings for 100 Mb/s and

10 Mb/s Ethernet hubs.

—100 or 10 half- or full-duplex mode—Use these settings for 100 Mb/s and 10 Mb/s Ethernet switches.

3-26 206380-A