VLAN

Click Device, then VLAN on the menu. A screen appears with seven tabs that include:

Setup

Modify VLAN

Modify Port

Rename

Remove

Port Detail

VLAN Detail

Setup

Use the Setup screen to create VLANs on the Switch. To propagate information about VLAN groups used on this Switch to external devices, you must specify a VLAN ID for each VLAN.

Configuring VLANs

43

Figure 24 Setup Screen

Available option on the Setup screen include:

VLAN ID – ID of configured VLAN (1-4094, no leading zeroes)

For examples on setting up VLANs, refer to “Sample VLAN Configurations”.

CAUTION: At least one port must always be an untagged member of VLAN 1 (the management VLAN). If you choose to connect all ports to VLANs other than VLAN 1, you will no longer be able to access the Web interface. If this happens, you will need to reset the Switch to factory settings.

Page 43
Image 43
3Com 3C16491 manual Vlan