Related Standards, Environmental, Physical | 3Com 3C16491 instruction

B	TECHNICAL INFORMATION

Related Standards

The Baseline Switch 2426 PWR Plus has been designed to the following standards:

Functional	IEEE 802.3 (Ethernet), IEEE 802.3u (Fast
	Ethernet), IEEE 802.3ab and IEEE 802.3z
	(Gigabit Ethernet), IEEE 802.3x (Flow Control),
	IEEE 802.1D 1993 (Bridging), IEEE D802.1Q
	1998 (Virtual LAN)
MAC	4096
Address
Safety	UL/CUL (UL 60950-1, CSA 22.2 No 60950-1),
	TUV/GS (EN 60950-1), IEC 60950-1, CB
EMC Emis-	EN50081-1, EN 55022 Class A, EN50082-1,
sions	IEC 1000-4-2/3/4/6, EN60555-2 Class A, EN
	60555-3, FCC Part 15 Subpart B Class A,
Immunity	EN 55024

Environmental

Operating Tempera- 0-45 °C (32–113 °F) ture

Storage Tempera-	-40-70 °C (-40-158 °F)
ture
Humidity	0-95% (non-condensing)
Standard	EN 60068 (IEC 68)—various parts

Physical

Width	44 cm (17.3 in.)
Depth	23.8 cm (9.4 in.)
Height	4.4 cm (1.7 in.) or 1U
Weight	3.2 kg (7.05 lb)
Mounting	Free standing, or 19 in. rack mounted using
	the mounting kit supplied

Electrical

Power Inlet	IEC 320
AC Line Frequency	50/60 Hz (+/- 3 Hz)
Input Voltage	100–240 VAC (auto range)
Current Rating	3 Amp (maximum)
Maximum Power	205 W
Consumption
Maximum Power	154 BTU/hr
Dissipation
Maximum	15.4 W per port
Pover-over-Ethernet
Budget

Image 81

3Com 3C16491 manual Related Standards, Environmental, Physical, Electrical

Contents

3C16491 Baseline Switch PWR Plus 3Com Corporation 350 Campus Drive Marlborough MA USA Contents Snmp Regulatory Notices Glossary Index Page Conventions About this Guide Product Registration Documentation Comments Features and Capabilities Overview of the Baseline SwitchAutosensing of MDI/MDIX Connections Autonegotiating 10/100 Mbps Ports Power-over-Ethernet Capability Physical FeaturesGigabit Combo Ports RJ-45/SFP Front Panel Gigabit Combo Ports RJ-45/SFP Link/Activity Status LEDs Rear Panel Power LED Package Contents Before You Begin Positioning the Switch Rack-Mounting or Free-Standing Using the Mounting Kit Placing Units On Top of Each Other Montagesatz Anweisungen Checking for Correct Operation Supplying Power to the Switch Using SFP Tranceivers Approved SFP TransceiversInserting an SFP Transceiver Inserting an SFP Transceiver Removing an SFP Transceiver Performing Spot Checks Installing the Switch Running the Discovery Application Requirements for Accessing the Web Interface Welcome screen of Discovery appears Discovered Devices Screen Logging On to the Web Interface Menu Navigating the Web Interface Lists the available items on the menu Menu Item Port Status Buttons Accessing the Interface Without Using Discovery Dhcp Assigned IP AddressManually Assigned Static IP Address Device Summary Information Configuration Overview Polling Interval Device View Modifying the IP Address Settings Administration SettingsAutomatic IP Configuration Color Key To set the IP address for the Switch IP Setup Restore Configuration Backup Configuration Upgrade Screen Firmware Upgrade Initialize Reboot User Summary System Access Modify User Create User Remove User System Time Setup SummarySnmp Add Snmp Remove Configuring VLANs Vlan Modify Port Modify Vlan Modify Port Screen Rename Remove Port DetailVlan Detail Forwarding Tagged/Untagged Frames Sample Vlan Configurations Setting Up Vlan Across Two Switches Setting Up Two VLANs on the Same Switch Spanning Tree Tagged Vlan Configuration Spanning Tree Screen Igmp Snooping Igmp QueryBroadcast Storm PoE Broadcast Storm Setup Screen Administration Configuring Port Settings Detail Port Administration Summary Screen Speed/Duplex for 1000 Mbps Connections Port Administration Setup Screen Guidelines for Creating Trunks Link Aggregation Link Aggregation Summary Screen Create Link Aggregation Modify Screen Modify Spanning Tree per Port Spanning Tree Summary Screen Port Mirroring Spanning Tree Setup Screen Statistics Port Mirroring Setup Screen QoS VoIP Summary Screen QoS VoIP Traffic Settings QoS VoIP Setup Screen Port Setup OUI Add OUI Summary Radius Client Security Radius Client Detail Screen Configure 802.1X Summary Screen 802.1X Settings 802.1X Detail Screen Address Table Monitoring Address Table Screen Cable Diagnostics Cable Diagnostic Screen Diagnostics Resetting to Factory Defaults Troubleshooting Forgotten Password Solving LED IssuesForgotten Static IP Address Link/Activity LED is on, but network performance is poor Fiber cable is connected, but the Module Active LED is off All ports appear to show continual activity If the Problem Persists Purchase Value-Added Services Troubleshoot Online Access Software DownloadsRegister Your Product Contact Us Telephone Technical Support and Repair Country Telephone Number Latsupportanc@3com.com Environmental Related StandardsPhysical Electrical Appendix B Technical Information Important Safety Information Safety Information Appendix C Safety Information Regulatory Notices Page 1000BASE-T Auto-negotiationBandwidth Category 5 Cables Category 3 CablesCategory 5e Cables Category 6 Cables Half Duplex Full DuplexIeee 802.1D Ieee 802.1Q Link Aggregation LayerMAC Address Network Server SwitchSubnet Address Subnet Mask Vlan Numbers Index Index