56CHAPTER 4: SWITCH INSTALLATION
Figure 35 Two Switch 8807 chassis in a cabinet
Switch880711U
Switch 8807 11U
(1) Blank filler panel | (2) | Cabling frame |
(3) Backward cabling frame | (4) | Reserved for external PoE power supply |
Guideline: The space marked in Figure 35 must be reserved, and the remaining is at your disposal.
One Switch 8810 chassis in a cabinet
The components and their height are as follows (from bottom up):
■Blank filler panel (2U)
■Cabling frame (2U)
■External PoE power supply (or blank filler panel if no external PoE power supply is installed) (4U)
■Blank filler panel (1U)
■Back cabling frame (1U)
■Switch 8810 chassis (14U)
■Blank filler panel (1U)
■Cabling frame (2U)