Upgrading the Software | 91 |
4Enter 5 at Boot menu prompt and press Enter. The system displays the download application program menu:
ETHERNET SUBMENU
1.Download file to SDRAM through ethernet interface and boot
2.Download file to Flash through ethernet interface
3.Download file to HardDisk through ethernet interface
4.Modify ethernet interface boot parameter
0. Return to main menu
Be sure to select 4 to modify boot parameter before downloading! Enter your
5Enter 4 to select TFTP for upgrading the software and press Enter to set the related TFTP parameters:
| Note: Two protocols for download, tftp & ftp. | ||
| You can modify | the flags following the menu. | |
| |||
n | The message prompts you to set the flags to 0x80 when you download files using | ||
TFTP and to 0x0 if you are using FTP. | |||
| ’.’ = clear field; | ||
| boot device | :fei0 | |
| processor number | : |
|
| host name | : | 8500 , |
| file name | : 8500.app | |
| inet on ethernet (e) | : 1.1.1.1 | |
| inet on backplane (b): |
| |
| host inet (h) | : 1.1.1.2 | |
| gateway inet (g) | : |
|
| user (u) | : |
|
| ftp password (pw) (blank = use rsh): | ||
| flags (f) | :0x80 | |
| target name (tn) | : |
|
| startup script (s) | : |
|
| other (o) | : |
|
| Write flash...done! |
|
|
6After you provide the required information, the system accesses the Ethernet interface submenu appears again:
ETHERNET SUBMENU
1.Download file to SDRAM through ethernet interface and boot
2.Download file to Flash through ethernet interface
3.Download file to HardDisk through ethernet interface
4.Modify ethernet interface boot parameter
0.Return to main menu
Enter your
7Specify where you wish to download the file (2 if you which to download the file to Flash), press Enter. Upon successful completion, the system display the following information:
Attached TCP/IP interface to fei0.
Attaching network interface lo0... done.
boot device | : fei0 | ||
unit number | : 0 | ||
processor number | : 0 | ||
host | name | : | 8500 |
file | name | : | 8500.app |