3Com 8814, 8807, 8810 manual RESET button, Status LEDs

Fabric Modules 19

Table 8 RS232/485 port specifications

Item	Description
Service	The port for monitoring and communication with the external subsystem,
	such as external PoE power supply module

■Console port

The Console port uses an RJ-45 connector. It can be connected to a background terminal for system debugging, maintenance, management, and host software loading.

Table 9 Console port specifications

Item	Description
Connector	RJ-45
Standard	Asynchronous EIA/TIA-232
Baud rate	9600 bps (default)
Transmission	15 m (49 ft.)
segment
Service	Connects a serial port of a local PC and runs terminal emulation on the
	PC.

n You can choose your own baud rate for the Console port.

■AUX port

The AUX port uses an RJ-45 connector. The port can serve as a backup port for the Console port to connect a background terminal, or directly connect a modem device, for remote system debugging, configuration, maintenance and management.

Table 10 AUX port specifications

Item	Description
Connector	RJ-45
Standard	Asynchronous EIA/TIA-232
Service	Connects a serial port of a PC (through a Modem pair for a remote PC) and runs
	terminal emulation on the PC.

RESET button

You can press the RESET button on the panel to reset the 360 Gbps Switch Fabric module.

Status LEDs

■CF status LED

You can learn the operating status of the CF card by reading the CF status LED on the panel.