2-2 CHAPTER 2: INSTALLING THE LINKBUILDER MSH
DUA1800-0AAA04
3Install modules and a Management Module if you are using one,
into the chassis, and check their operation
4Attach your network cabling to the modules you have installed.

A Suitable Site For Installation

Before you install the MSH, make sure that th e location you have
chosen is suitable. There shoul d be:
■Adequate ventilation. The chassis has three sets of ventilation
holes - one on the top of the chassis, one at the back and one
underneath. Ventilation panels and the air-intake at the front of
the fan tray must be free of obstructions at all times to allow
adequate circulation of cooling air.
■Adequate clearance to allow for cable connections, viewing and
use of display panel and LEDs, and installation and removal of
modules.
■Access to a power supply with two sockets.
■No direct sources of electrical interference in the immediate area,
for example, machinery, power lines, transmitters.
■No danger of condensation, liquids or excessive amounts of dust
entering the chassis.
Remember also that the MSH operates correctly in temperatures
between 0°C and 40°C (32°F and 104°F).

Installing The Chassis

A pair of brackets for mounting the MSH are supplie d with the
chassis. The MSH can be:
■Fitted into a standard 19 inch rack system.
■Left as a stand-alone piece of equipment, for example, on a desk
or shelf.
Chassis.bk : CHAPTER2 Page 2 Monday, February 10, 1997 1:11 PM