3-24 CHAPTER 3: INSTALLING MODULES INTO THE MSH CHASSIS
DUA1800-0AAA04
Figure 3-7 Fitting the converter
Installing The ECS Module Into The Chassis
1Remove the locking bar from the front of the chassis.
2Ensure that the MSH chassis is installed correctly and all necessary
cables are present. Prepare a slot to receive the module, removing
blanking plates if necessary.
3Configure the module as necessary, referring to the relevant user
guide.
4Hold the module in the correct position with the pa nel of network
connectors facing towards you.
Chassis.bk : CHAPTER3 Page 24 Monday, February 10, 1997 1:11 PM