2-14 CHAPTER 2: INSTALLING THE LINKBUILDER MSH
DUA1800-0AAA04
6.3 x 32 mm, ceramic
Replace fuse ONCE only.
If the unit consistently blows fuses, there may be a problem.
Contact your supplier for advice.
Figure 2-6 Replacing Fuses - removing the cartridge
To replace one of these fuses proceed as follows:
1Using a suitably sized screwdriver, unscrew the officeholder
cartridge from the power inlet panel (refer to Figure 2-6). Slide
the cartridge out of its position.
2Pull the spent fuse from the cartridge and fit a new one of the
correct type as specified above.
Chassis.bk : CHAPTER2 Page 14 Monday, February 10, 1997 1:11 PM