DUA1800-0AAA04
Handling Modules 3-15
user guide which came with your FDDI RingBuilder module for
more details.
LinkSwitch Expansion Modul e
The LinkSwitch Expansion Modul e must be installed next to a
LinkSwitch module. It provides six RJ45 Ethernet ports connected
to the rest of the network through the main LinkSwitch module.
Each port can support its own dedicated 10Mbps Ethernet device
or network switching directly to FDDI , so reducing contention for
the network.
Handling Modules
Safety Information
This equipment must be earthed.
Modules operate under SELV conditions (Safety Extra Low Voltage
according to IEC 950), the conditions of which are maintained
only if the equipment to which they are connected is also
operating under SELV.
Modules can be easily damaged by st atic:
Do not remove the module from its anti-static packaging until you
are ready to install it into the MSH chassis.
Do not touch the pins, leads, connections or any components on
the module.
Handle modules only by their edges.
Always wear an anti-static wristband if you have one.
Always store or transport modules in anti-static packaging.

Chassis.bk : CHAPTER3 Page 15 Monday, February 10, 1997 1:11 PM