Installing the Windows NT Driver | 3Com Server instruction

Installing the Windows NT Driver

3-3

3At the following prompts, make these selections:

■Installation Options: Driver Options

■Driver Options: Conﬁgure Network Drivers

■Additional Driver Actions: Select a Driver

The installation proceeds.

4At the Select a Driver menu, insert the 3Com diskette in the drive.

5Press Insert to add a driver from the diskette.

6Press F3 to change the path to the drive that contains the 3Com diskette.

7At the DOS prompt, enter the path for the driver: nwserver\4.1x

The installation proceeds.

8At the prompt for NIC selection, select 3Com Token Ring-in-Fast Ethernet Driver.

As the installation continues, provide network information when prompted.

9When the installation is ﬁnished, exit to DOS and restart the server.

Installing the Windows NT Driver

Follow the instructions for Windows NT 3.51 or for

Windows NT 4.0.

Windows NT 3.51

Follow these steps to install the driver:

1Start Windows NT and log on.

2In the Control Panel, double-click Network.

3In the Network Settings window, click Add Adapter.

4In the Add Network Adapter window, scroll to (<other> Requires disk from manufacturer) and click Continue.

5Insert the 3Com diskette in the drive and make that the active drive.

Image 21

3Com Server manual Installing the Windows NT Driver, At the following prompts, make these selections

Contents

Part No -1128-000 Published February 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Configuration Figures Tables Text Conventions Installation Requirements Lifetime Limited Warranty Australia, New Zealand Japan Asia Italy, Greece, Spain, Portugal, MaltaSweden, Finland, Norway Belgium, Netherlands, Luxembourg About this Guide ConventionsIcon Description Convention Description Related Documentation 1Basic TR-in-FE System Introduction 2Larger-Scale TR-in-FE System Safety Precautions Hardware Installation Installation Requirements Installation InstructionsUnpack and inspect the NIC Insert the 3C395 NIC in a PCI slot Remove the computer cover Turn on the PC and check the NIC LEDs 2Connecting the Cable Before You Install Software Before You Install SoftwarePage Obtaining the Latest Drivers Installing the NetWare Server Driver At the console prompt, enter NetWare Installing the Windows NT Driver Windows NTAt the following prompts, make these selections 4CHAPTER 3 Software Installation Troubleshooting LEDsColor Flashing Steady Off DOS Diagnostic Tests About the Conﬁguration and Diagnostic ProgramTest Description Running Group 1 Tests Boot the PC under DOSFrom the Test menu, select Run Tests To start the tests, press Enter Running the Group 3 Test Getting Help If a Test Fails Changing the Test Setup Symptom Tip Further Testing Symptom Tip Page Option Description Default Available Settings Configuration Changing Conﬁguration Settings From the Install menu, select a NIC as followsSelect options and select settings To save settings, select OK When all changes are complete, exit the programChanging the Windows NT Registry Page Specifications Figure A-1 shows the RJ-45 connector pin assignments RJ-45 Connector Pin Assignments Online Technical Services 3Com Bulletin Board ServiceWorld Wide Web Site Access by Analog Modem 3ComFacts Automated Fax ServiceAccess by Digital Modem 408 654 Support from Your Network Supplier 3ComForum on CompuServe Online ServiceLog on to your CompuServe account Press Return to see the 3ComForum main menu Support from 3Com 3Com Iberia Regional Sales Office Telephone Number 3Com GmbH3Com Latin America 3Com Mediterraneo Country Telephone Number Fax Number Returning Products for Repair Numbers Index URL B-1 3Com Corporation Limited Warranty FCC Class B Statement FCC Declaration of Conformity