Changing the Windows NT Registry

5-3

7To save settings, select OK.

You can save the configuration settings to a default file 3C395.SET in the CONFIG directory. Select Save under File Options in the Adapter Configuration dialog box and enter the location for the file. For example, if the CONFIG directory is on drive C, enter:

c:\config\3c395.set

8When all changes are complete, exit the program.

Changing the Windows NT Registry

If the PC cannot run the Configuration and Diagnostic Program, you may need to set the NIC speed and duplex level in the Windows NT registry.

CAUTION: Mistakes in the registry can cause system crashes. Be sure to save a copy of the original registry settings before you make changes, so that you can restore the registry if necessary. If you are not sure about the registry settings, consult with a knowledgeable network administrator before proceeding.

You can set the NIC speed and duplex level in the registry by setting the MEDIA keyword in this subkey:

\\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services \E190x?\MEDIA keyword

where keyword is one of the following:

100HALF

100

Mbps with half-duplex operation

100FULL

100

Mbps with full-duplex operation

AUTO

Driver performs auto configuration

NotPresent

Use settings on EEPROM

The default MEDIA keyword setting is NotPresent.

Page 33
Image 33
3Com Server Changing the Windows NT Registry, To save settings, select OK, When all changes are complete, exit the program