3Com TECHD-0000000122 manual Safety Requirements, Class a Notices

Chapter 2: Prepare the Site

Safety Requirements

If not properly installed and maintained, electrical circuitry equipment like the TippingPoint X-Series can pose dangers to both personnel and equipment. To prevent accidents, adhere to the following guidelines to ensure general safety:

•Remove any dust from the area and keep the area around the TippingPoint X-Series system clear and dust-free during and after installation.

•Wear safety glasses if you are working under conditions that might be hazardous to your eyes.

•There are no serviceable parts inside.

Class A Notices

The following notices apply to the X505 and X506, which are Class A devices.

Note: This Class A digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du

Réglement sure le matériel brouilleur du Canada.

Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

•This device may not cause harmful interference.

•This device must accept any interference received, including interference that may cause undesired operation.

Note: This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. Statement 191

8

X-Series Hardware Installation and Safety Guide V 2.5