3M 245, 247 23

Made in the USA by 3M Health Care.

3M is a trademark of 3M Company, used under license in Canada. RANGER, BAIR HUGGER, and the BAIR HUGGER logo are trademarks of Arizant Healthcare Inc., used under license in Canada. ©2013 Arizant Healthcare Inc. All rights reserved.

3M Deutschland GmbH, Health Care Business

Carl-Schurz-Str. 1, 41453 Neuss, Germany

3M Health Care, 2510 Conway Ave., St. Paul, MN 55144 USA TEL 800-228-3957 www.rangerfluidwarming.com 202524A 07/13

Contents

Page Table of Contents Technical Service and Order Placement USA Initial Equipment Check Introduction Voltage, Alternating Current (AC) This system is subject to European WEEE Directive 2002/96/EC Protective earth ground Consult instructions for use Follow instructions for use Explanation of Signal Word Consequences WARNING: CAUTION: NOTICE: Warnings and Cautions NOTICE: 2.To avoid device damage: •Do not insert metallic instruments in the warming unit •Do not use abrasive materials or solutions to clean the heater plates Before Servicing Equipment Product Description Ranger Models 245 and Maintenance and Storage 1.Unplug the warming unit 5.Wipe off the unit to remove excess fluid 2.Clean the unit by using the cleaning tool Store all components in a cool, dry place when not in use Alconox is a trademark of Alconox, Inc Blood/Fluid Warming System Preventative Maintenance Checklist 2.Slide the cassette into the slot of the Ranger warming unit 4.Close patient line with white clamp to stop flow 5.Turn the Ranger warming unit ON and allow it to warm up for 5 minutes note: Most handheld temperature meters have a ±1°C tolerance 3MTM RangerTM Blood/Fluid and Irrigation Warming Systems The over-temperature alert test causes the Ranger warming unit to go into an Loosen the Ranger Blood/Fluid Warming Unit, Model 245 Maintenance Log model ____________ sn Ranger Irrigation Fluid Warming System, Model 247 Preventative Maintenance Checklist Page Ranger Irrigation Fluid Warming, Model 247 Maintenance Log model ____________ sn Replacing the Power Fuse Troubleshooting Page Specifications