Check the 3MTM RangerTM system website to ensure you have the most recent version of this document.

www.rangerfluidwarming.com reorder #202524A

3MTM RangerTM Blood/Fluid and Irrigation Warming Systems

English

 

 

NOTICE:

1.Federal law (USA) restricts this device to sale by or on the order of a licensed healthcare professional.

2.To avoid device damage:

•Do not clean the warming unit with solvents. Damage to the case, label, and internal components may result.

•Do not immerse the warming unit in cleaning or sterilizing solutions. The unit is not liquid proof.

•Do not insert metallic instruments in the warming unit.•Do not use abrasive materials or solutions to clean the heater plates.

•Do not allow spills to dry inside the unit, as this may make it more difficult to clean the unit.

3.The Ranger blood/fluid warming unit and irrigation fluid warming unit meet medical electronic interference requirements. If radio frequency interference with other equipment should occur, connect the unit to a different power source.

Before Servicing Equipment

All repair, calibration, and servicing of this equipment must be performed by 3M Patient Warming or an authorized service technician. 3M Patient Warming assumes no responsibility for the reliability, performance, or safety of the equipment if:

•Modifications or repairs are performed by unauthorized personnel.

•The equipment is used in a manner other than that described in the operator’s manual.

•The equipment is installed in an environment that does not meet the appropriate electrical and grounding requirements.

•Do not modify this equipment without authorization of the manufacturer.WARNING:

•To reduce the risk associated with exposure to biohazards always perform the Cleaning the Ranger warming unit procedure on page 10 prior to beginning service procedures, returning the warming unit for service, and prior to disposal.

7

202524A