3M 40800 Unpacking, Uncrating, Removal of Pallet, Figure, Disposal of Packaging Materials

6-UNPACKING

6.1 Uncrating

The envelope attached to the shipping box contains the uncrating instructions of the machine (Figure 6-1).

Removal of Pallet

Loosen and remove nuts and brackets using the open end spanner supplied in the tool box (Figure 6-4).

Figure 6-1 Figure 6-4

Cut straps. Cut out staple positions along the bottom of the shipping box (or remove staples with an appropriate tool - Figure 6-2)

Figure 6-2

A cardboard box is located under the machine body. Retrieve the instruction manual for additional proce- dures of the set up. The box also contains parts re- moved for shipping, spare parts and tools (Figure 6-5).

After cutting out or removing the staples, lift the
shipping box in order to clear the machine
(two persons required).					Figure 6-5
			6.2 Disposal of Packaging Materials
			The 700aks package is composed of:
			-	Wooden pallet
			-	Cardboard shipping box
			- Wooden supports
		Figure 6-3	-	Metal fixing brackets
			-	PU foam protection
			-	PP plastic straps
			-	Dehydrating salts in bag
			-	Special bag of laminated polyester/aluminium/
Transport the machine with a fork-lift truck to the				Polyethylene (sea freight package only)
			-	Polyethylene protective material
operating position. Lift the pallet at the point indicat-
ed in Figure 6-3(weight of machine + pallet = See			For the disposal of the above materials, please follow
Specifications).
			the environmental directives or the law in your country.
	700aks-NA		17			2011 October