3M 7623-T-110, 7626-T-110, 7622-T-110 manual mm Semi-Con 1st Scotch Mastic Strip 2230 Cable Jacket

8.0Install Ground Braid

8.1Select a Scotch® Mastic Strip 2230 from kit and remove white release liners. Using light tension apply a SINGLE

WRAP of mastic around the cable jacket 1/4" (6 mm) from cut edge (Figure 10). Cut off excess.

1/4" (6 mm)

Semi-Con

1st Scotch® Mastic Strip 2230 Cable Jacket

Figure 10

8.2Position pre-formed ground braid with short tail over wire shield directly adjacent to cable jacket cut edge. Position long tail of ground braid, extending over cable jacket with solder block over mastic strip (Figure 11). Secure ground braid to cable jacket 4-1/2" (114 mm) from cable semi-con edge using vinyl tape (Figure 11).

NOTE: Position vinyl tape with care, it also serves as a marker for positioning the termination.

4-1/2" (114 mm)

Semi-Con Edge

Shield Wire

Ground Braid

Cable Jacket Edge Solder Block

1st Scotch® Mastic Strip 2230 Vinyl Tape Marker

Figure 11

8 78-8113-5099-6 Rev E