3M 800ab 39600 manual 8 - Knife Warning Label, 9 - Tape Threading Label

Important Safeguards (Continued)

The following labels are located on the lower taping head. Replacement part numbers for these two labels are listed in Section II.

The "Warning-Sharp Knife" label warns operators and service personnel of the extremely sharp knife used to cut the tape at the end of the box sealing operation. The label, shown in Figure 1-8,is located on the orange knife guard between the applying roller assembly and the buffing roller assembly. Never operate taping head with knife guard removed.

Before working with the taping head or loading/ threading tape, refer to Figures 3-1 and 3-2, in Section II, to identify the knife location. Keep hands out of these areas except as necessary to service the taping head or to load/thread tape.

Figure 1-8 – Knife Warning Label

The "Tape Threading Label" shown in Figure 1-9, is attached to the left side of the lower taping head. This label provides a convenient tape threading diagram. More detailed tape loading and threading information is provided in the "Operation" section of this manual.

Figure 1-9 – Tape Threading Label

5