3M 800ab 39600 manual Installation and Set-Up Continued, 2 - Cable Tie, Taping Head

Installation and Set-Up (Continued)

Figure 2-2 – Cable Tie, Taping Head

6.Check for free action of lower taping head.

WARNING – Keep hands/fingers away from tape cut-off knife under

orange knife guard. Knife is extremely sharp and can cause severe injury.

Push buffing roller into head to check for free, smooth action of taping head.

7.Ensure that the tape drum bracket assembly is mounted straight down, as shown in

Figure 2-3A. The tape drum bracket assembly can be pivoted to provide clearance or for retrofit in certain cases.

Outboard tape roll mounting (Alternate Position)- Remove the tape drum bracket assembly, stud spacer and fasteners from the taping head.

Install and secure on the infeed end of the lower frame, as shown in Figure 2-3B.

Figure 2-3 – Machine Bed Height Adjustment and Lower Tape Drum Bracket Position

12