Operation (Continued)

WARNINGS

1.Turn electrical supply off and disconnect before servicing taping head or performing any adjustments or maintenance on the machine.

2.Turn electrical supply off when machine is not in use.

3.Before turning drive belts on, be sure no tools or other objects are on the machine bed.

4.Keep hands and loose clothing away from moving belts.

5.Never attempt to work on any part of the machine, load tape or remove jammed boxes from the machine while machine is running.

6.When feeding boxes to the machine by hand, push box in from end only – DO NOT PUSH WITH HANDS ON ANY CORNER OF THE BOX.

7.Taping head utilizes an extremely sharp tape cut-off knife. The knife is located under the orange knife guard that has the 'WARNING – SHARP KNIFE" label. Before loading tape, refer to Section II, page 6, Figure 3-2 to identify the knife location. Keep hands out of this area except as necessary to service the taping head.

8.Keep hands or loose clothing away from compression rollers on infeed end of machine when feeding boxes to machine.

9.Failure to comply with these warnings could result in severe personal injury and/or equipment damage.

Electrical "On/Off" Switch

The box drive belts are turned on and off ("Off" button is red) with the electrical switch on the side of the machine frame.

Note –The case sealer has a circuit breaker located in the electrical enclosure on the lower right side of the machine frame. If circuit becomes overloaded and circuit breaker trips, see "Maintenance – Circuit Breaker", page 20.

Emergency Stop Switch

The machine electrical supply can be turned off by pressing the latching emergency stop switch. To restart machine, rotate emergency stop switch (releases switch latch) and then restart machine by pressing green (On) button on side of machine frame.

Tape Loading/Threading

See Section II, Pages 7 and 8

Note –If lower tape drum is mounted in alternate lower outboard position, remove taping head from machine bed by pulling straight up, insert threading needle in taping head and replace taping head. Install tape roll on drum (adhesive on tape leg up), thread tape under knurled roller on outboard mount, then attach tape to threading needle and pull tape through taping head with threading needle.

CAUTION – Taping head weighs approximately 7.2 kg [16 pounds]

without tape. Use proper body mechanics when removing or installing taping head.

16

Page 20 Page 22
Page 21
Image 21
3M 800ab 39600 manual Emergency Stop Switch, Tape Loading/Threading
Page 20 Page 22

800ab 39600 specifications

The 3M 800AB 39600 is a versatile, high-performance adhesive that has rapidly gained recognition across various industries for its superior bonding capabilities and innovative formulation. This adhesive is engineered to offer robust performance while catering to a wide range of applications, making it an essential product for manufacturers and professionals alike.

One of the standout features of the 3M 800AB 39600 is its exceptional adhesion to a variety of substrates. It demonstrates excellent bonding properties on materials such as metals, plastics, ceramics, and wood. This flexibility makes it ideal for applications in automotive, aerospace, construction, and electronics sectors, where different materials often come together in one project.

The technology behind 3M 800AB 39600 revolves around its dual-component system. It consists of a resin and hardener that, when mixed, undergo a chemical reaction to form a durable bond. This curing mechanism ensures that the adhesive achieves optimal strength and reliability, enhancing its overall performance under demanding conditions. The adhesive is designed to cure at room temperature, providing convenience and efficiency in both industrial settings and smaller repair applications.

Another notable characteristic of the 3M 800AB 39600 is its resistance to environmental factors. It offers excellent resistance to heat, moisture, and various chemicals, ensuring that the bonded joints maintain their integrity even in challenging conditions. This durability is particularly beneficial in outdoor applications or in environments subject to temperature fluctuations and exposure to harsh substances.

Furthermore, 3M has placed a strong emphasis on user-friendly application with this adhesive. The material can be applied using standard dispensing equipment, including static mix nozzles that allow for a uniform blend of the resin and hardener. This easy application process minimizes waste and enhances the efficiency of the bonding operation.

In summary, the 3M 800AB 39600 is a high-quality adhesive marked by its strong adhesion to diverse materials, its innovative dual-component technology, and its impressive resistance to environmental challenges. Its versatility and reliability make it an invaluable asset for countless industrial and commercial applications, streamlining processes and ensuring long-lasting bonds in various projects. Whether for manufacturing, assembly, or repair, the 3M 800AB 39600 is a top choice among professionals seeking dependable adhesive solutions.
Top Page Image Contents