Chapter 2: Installing the monitor
To import the standard TouchSurround definition for Windows NT 4.0 and
Windows 9X operating systems, follow these steps:
1.Select the Windows Start button, select Programs, and then select Command Prompt.
2.At the command prompt, type
CD\TOUCH\NT for Windows NT
CD\TOUCH\W9X for Windows 9X
3.Type TOUCHINI /i350.ini
where 350.ini is the standard button definition file.
(Note: There is a space between TOUCHINI and the forward slash.)
The standard TouchSurround button configuration takes effect the next time you start Windows NT 4.0 or Windows 9X operating systems.
Customizing driversSome of the driver features that can be customized include double touch settings, touch screen sensitivity, and beep on touch. For instructions on how to customize driver features, refer to the appropriate software guide (see “Software guides” on page 2).
| Step 6: Set | Backlights saver |
| “backlights saver” | You can extend the life of the monitor’s backlights (and conserve power) |
| and “safe touch” | by setting the host computer’s energy saver to “turn off the monitor” after |
| a specified number of minutes of inactivity. The energy saver (which is, in |
| effect, a backlights saver) is adjusted in the Display Properties dialog box |
| of Windows XP, 2000, and 9X operating systems. |
| Windows NT 4.0 operating system does not have an energy saver, so if the |
| host computer is running with Windows NT 4.0 operating system, the |
| backlights will be on whenever the unit is powered up (even if the |
| Windows NT 4.0 operating system screen saver is set to display a blank |
| screen). |
| Safe touch |
| This setting changes the way the touch screen responds when the user |
| touches the screen to reactivate the monitor following a period when the |
| backlights have been off. |
| With a safe touch setting applied, the user will not accidentally activate a |
| touch screen button on the part of the screen that is touched. |
25