3M Dynapro ET 350 Monitor User’s Installation Guide

3.Put on an ESD grounding wrist strap if one is available. If a grounding wrist strap is not available, touch a grounded metal object to discharge any static charge from your body.

4.Open the enclosure.

￿If your unit has security screws on the back of the bezel, remove them with a security screwdriver (the locations of the security screws are shown in Figure 13).

Figure 13: Location of optional security screws

￿Apply a 5/32-inch (4 mm) Allen key to the latch screw on the top of the enclosure. Turn the key counterclockwise ¼ turn, or until you feel the unit opening.

5.Have one person support the enclosure in the open position during the rest of this procedure so that the monitor does not tip.

38