3M Dynapro ET 350 Monitor User’s Installation Guide
FCC compliance
CE and EMC emissions compliance
Canadian emissions compliance
Electromagnetic compatibility immunity standards
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.
The ET 350 monitor complies with the CE mark related to the Low Voltage Directive 73/23/EEC as confirmed in the Declaration of Conformity.
The ET 350 monitor complies with the CE mark related to the EMC Directive 89/336/EEC as confirmed in the Declaration of Conformity.
This Class A digital apparatus meets all requirements of the Canadian
Cet appariel numerique de la classe A respecte toutes les exigences due Reglement sur le material brouilleur du Canada.
Electromagnetic compatibility immunity standards | |
|
|
ITE immunity | EN55024 |
|
|
Electrostatic discharge | |
|
|
Radiated immunity | |
|
|
Electrical fast transient | |
|
|
Surge transient | |
|
|
Conducted immunity | |
|
|
AC sags and dropouts | |
|
|
54