3M ET 350 Installing monitor with KVM extender, settings, APPENDIX B, Check and set KVM, About this appendix, Step 1:Cable-length jumpers

APPENDIX B

Installing monitor with KVM extender

About this appendix

This appendix provides instructions for installing the ET 350 monitor with the keyboard, video, and mouse (KVM) extender option. For more information about the KVM extender, refer to the manufacturer’s manual that came with your ET 350 monitor.

The KVM extender option allows the monitor to be located up to 1000 feet (300 meters) from the host computer. The KVM extender has a local unit and a remote unit. The remote unit is built into the housing of the monitor.

Step 1:Cable-length jumpers

Check and set KVM There are three cable-length jumpers on the remote unit of the KVM

settings extender’s circuit board, inside the monitor’s enclosure (Figure 22).

Figure 22: Enclosure of ET 350 monitor with KVM extender

57