3M Dynapro ET 350 Monitor User’s Installation Guide
These jumpers (JP3, JP4, and JP5) can be set to adjust equalization of the monitor’s display to compensate for loss of image quality due to the signal passing through a long cable.
Important
If the length of the cable running between the local and remote units is 655 to 1000 feet (200 to 300 meters), which is the default setting for the ET 350 monitor, the jumpers should not need adjusting.
To set the
1.Put on an ESD grounding wrist strap.
Important
To prevent damage from electrostatic discharge (ESD), wear a grounding wrist strap when working with electronic components inside the enclosure. Follow the instructions that come with the wrist strap. If a grounding wrist strap is not available, touch a grounded metal object to discharge any static from your body.
2.Disconnect power from the ET 350 monitor.
3.Determine the length of cable between KVM local and remote units.
4.Set the
If the cable is this length | Set the three | |||
|
|
|
|
|
655 to 1000 feet |
|
|
| Default setting for ET 350 monitor. |
(200 to 300 meters) |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
330 to 655 feet
(100 to 200 meters)
0 to 330 feet |
|
|
| Off |
|
|
| ||
(0 to 100 meters) |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
58