3M Dynapro ET 350 Monitor User’s Installation Guide
Maintaining the ET 350 monitor with Moisture Deflector
The Moisture Deflector is made of durable plastic and, like other
3M Dynapro components, is designed to function in rugged conditions.
It is not indestructible, however. Follow these guidelines to extend its life and help ensure optimal performance:
Before starting the ET 350 monitor with Moisture Deflector, make sure that the temperature is at least 0ºC.
Do not hang anything from the Moisture Deflector. Doing so may cause it to perform poorly.
Before opening the enclosure of the ET 350 monitor with Moisture Deflector, make sure that the unit is completely dry. If water has collected on the top of the enclosure and is not removed before opening it, moisture might run into the unit.
To open the unit, you will need to remove the four sealing screws attached to the back of the unit. After closing the enclosure,
When handling the monitor, do not grasp it by the Moisture Deflector.
If it is necessary to ship the monitor for any reason, use the original packing materials, if possible. When packing the unit, take care to protect the Moisture Deflector from being damaged during shipping.
34