System Status screen
The System Status screen contains the following information:
•lan1 interface for web access and R3000 communications: LAN1 IP address and netmask specified in screen 3 (Configure Network Interface), and current status
(“Active” or “Inactive”)
•lan2 interface for bandwidth monitoring: LAN2 IP address and netmask specified in screen 4 (Configure Network Interface), and current status (“Active” or “Inactive”)
•Default gateway IP address specified in screen 5 (Configure default gateway)
•Configure host name specified in screen 7 (Configure Host Name)
•DNS server IP address(es) specified in screen 6 (Configure Domain Name Servers)
•Current status of the Threat Analysis Reporter
•Current Version of the Threat Analysis Reporter software
NOTE: Modifications can be made at any time by returning to the specific screen of the Quick Start menu.
Log Off, Disconnect the Peripherals
A.After completing the Quick Start setup procedures, return to the Quick Start menu screen and press 9 to log out.
B.Disconnect the peripherals from the Threat Analysis Reporter.
C.Proceed to Physically Connect the Unit to the Network.
42 | 8e6 Threat Analysis Reporter Quick Start Guide |
