Aastra Telecom 480I Softkeys as Customized Flash Key, Softkeys as Customized Park/ Pickup Keys

Using the 480i Phone

services. The phone performs an HTTP GET on the URI created by your system administrator.

You can set the following parameters for object requests:

•xml application URI

•xml application title

The xml application URI is the application you are loading into the IP phone. You must get this URI from your system administrator.

The xml application title is the name of the XML application that displays on the Services menu in the IP Phone UI (as option #4).

Softkeys as Customized Flash Key

You can set a softkey to generate a flash event when it is pressed on the 480i. You do this by setting the softkey to "flash". The IP phone generates flash events only when a call is connected and there is an active RTP stream (for example, when the call is not on hold).

Softkeys as Customized Park/ Pickup Keys

The IP phone has a park and pickup call feature that allows you to park a call and pickup a call when required. There are two ways a user can configure this feature:

•Using a static configuration

•Using a programmable configuration (configure soft- keys)

Note: The IP phone accepts both meth- ods of configuration. However, to avoid redundancy, Aastra Tele- com recommends you configure either a static configuration or a programmable configuration.

The IP phones support the Park/ Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ PBX servers.

Reference

For more information about configuring park/pickup on the 480i phone, see "Park Calls/Pick Up Parked Calls" on page 23.

Softkeys as Customized Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do this by setting the softkey to "empty". The soft keys are added in order (from softkey1 to softkey20) after any hard-coded keys have been added. If a particular soft key is not defined, it is ignored.

State-Based Softkeys

You can configure a specific state to display when a softkey is being used. Available states you can configure for each softkey include:

•idle - The phone is not being used.

•connected - The line currently being displayed is in an active call (or the call is on hold)

•incoming - The phone is ringing.

•outgoing - The user is dialing a number, or the far-end is ring- ing.

By default, the softkeys display in the states of idle, connected, incoming, and outgoing. All states are enabled.

In the Aastra Web UI, the operational states for each softkey display enabled. To disable a state, you uncheck the box for that operational state.

480i IP Phone User Guide 13