The IP phone must be config- ured for a specific type of proto- col to use. (TFTP is enabled by default). You can configure the following protocols on the IP phone:

-TFTP (Trivial File Transfer Protocol)

-FTP (File Transfer Protocol)

-HTTP (Hypertext Transfer Protocol)

A 802.3 Ethernet/Fast Ethernet

LAN

Category 5/5e straight through cabling

Power over Ethernet (PoE) power supply (optional acces- sory – necessary only if no inline power is provided on the net- work).

Installation and Setup

If your system administrator has not already setup your 480i phone, please refer to the Aastra 480i Installation Guide for basic installation and physical setup of the 480i. For more advanced administration and configuration information, system and network administrators should refer

to the Aastra SIP 480i/480i CT/ 9112i/9133i IP Phone Administration Guide.

Introduction

2480i IP Phone User Guide

Page 8
Image 8
Aastra Telecom 480I manual Introduction, Installation and Setup