AB Soft IN2106, IN2104, IN2102 manual Using the menus

Using the menus

To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) Use the arrow buttons to move up and down to highlight the desired menu, then press the Select button.

To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value or select an option or turn the fea- ture on or off. Press Select to confirm your changes. Use the arrows to navi- gate to another setting. When your adjustments are complete, press Menu to access a different menu; press the Menu button at any time to navigate to the higher-level menu and ultimately close the menus.

The menus are grouped by usage:

•The Basic Picture menu provides common image adjustments.

•The Advanced Picture menu provides more complex image adjust- ments.

•The Setup menu provides set-up type adjustments that are not changed often.

•The Status and Service menu provides information about the projector and source.

keypad navigation buttons

Basic Picture	Advanced Picture
menu	menu

Setup menu Status and Service menu

27