Abit NI8 SLI # Voltage Monitoring, All Voltages, Shutdown Enable, Beep Enable, High/Low Limit

3-6 Chapter 3

#Voltage Monitoring:

Click <Enter> key to enter its submenu:

µGuru Utility V0.09

OC Guru	ABIT EQ
	Voltage Monitoring					High	Low
		Reading	Shutdown Beep
(*)CPU Core Voltage		1.550V	Enable	Enable		Limit	Limit
			(*)	(*)		1.89V	1.00V
(*)DDR Voltage		2.70V	( )	(*)		2.90V	2.10V
(*)DDR VTT Voltage		1.35V	( )	(*)		1.55V	1.05V
(*)CPU VTT 1.2V Voltage		1.22V	( )	(*)		1.45V	0.95V
(*)NB 1.4V Voltage		1.45V	( )	(*)		1.70V	1.10V
(*)SB 1.5V Voltage		1.55V	( )	(*)		1.80V	0.20V
(*)ATX +12V(24-Pin Connector)		11.77V	( )	(*)		3.00V	9.60V
(*)ATX +12V(4-Pin Connector)		11.71V	( )	(*)		14.40V	9.60V
(*)ATX +5V		5.03V	( )	(*)		6.00V	4.00V
(*)ATX +3.3V		3.39V	( )	(*)		3.95V	2.65V
(*)ATX 5VSB		5.06V	( )	(*)		6.00V	4.00V
↑↓:Move Enter:Select +/-/PU/PD:Value					F10:Save ESC:Exit

All Voltages:

These items display the voltage of each element.

!Shutdown Enable:

Use <Space> key to enable system shutdown function. If the voltage of corresponding element is higher/lower than the high/low limit, the system would automatically shutdown.

!Beep Enable:

Use <Space> key to enable warning beeps function. If the voltage of corresponding element is higher/lower than the high/low limit, warning beeps will sound.

!High/Low Limit:

These items set the high and low voltage limit.

NOTE: The value of high limit must be set above the one of low limit.

NI8 SLI Series