Abit NI8 SLI Front Panel Switches & Indicators Headers, HLED Pin 1, RST Pin 5, SLED Pin 2

2-16 Chapter 2

(9). Front Panel Switches & Indicators Headers

This header is used for connecting switches and LED indicators on the chassis front panel.

Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention to connect these headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could cause system malfunction.

•HLED (Pin 1, 3):

Connects to the HDD LED cable of chassis front panel.

•RST (Pin 5, 7):

Connects to the Reset Switch cable of chassis front panel.

•SPKR (Pin 13, 15, 17, 19):

Connects to the System Speaker cable of chassis.

•SLED (Pin 2, 4):

Connects to the Suspend LED cable (if there is one) of chassis front panel.

•PWR (Pin 6, 8):

Connects to the Power Switch cable of chassis front panel.

•PLED (Pin 16, 18, 20):

Connects to the Power LED cable of chassis front panel.

NI8 SLI Series