| Chapter 2 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6.Insert the SLI Bridge Connector into the SLI goldfingers on each graphics card.
7.The SLI bracket included in the package is used for supporting the SLI bridge connector and the two SLI graphics cards.
8.Insert the SLI bracket into the bracket slot between the graphics cards. Secure the SLI bracket and the graphics cards to the chassis with screws.
NOTE: The OTES SLIpstream that packed in the package is optional. Please refer to the Quick Installation Guide of the OTES SLIpstream if you wish to install it.
IMPORTANT: Please disable the following items in BIOS setup while running under SLI mode: All the “FanEQ controls” (CPU, NB, SYS, OTES and AUX FanEQ Control). The system may be unstable without doing so. Detail information about these items will be described in “Chapter 3. BIOS Setup”.
NI8 SLI Series
