ACCO Brands GBC 2064WF-1 operation manual Nip Pressure Adjustment, Pull Roll Lift Handle Fig

GBC 2064WF-1

FIGURE 12

FIGURE 13

FIGURE 14

Operation Manual

Nip Pressure Adjustment:

The Nip pressure adjustment allows the operator to adjust the downward pressure of the pull rolls and main rolls.

Pull Roll Lift Handle: (Fig. 12)

Select the setting from the pre-set values and lock latch into the appropriate slot.

-Open -1 Inch -3/4 Inch -1/2 Inch -3/8 Inch -3/16 Inch -1/16 Inch

-Low Pressure

-High Pressure

Heated Main Roll Lift Handle: (Fig.13)

Turn handle clockwise to lower main roll & adjust the Nip Pressure.

On Off Switch: (Fig. 14) to apply Main Power to the Laminator, Press the switch to the “ON” Position. To disconnect Main Power to the Laminator, press the switch to the “OFF” position.

Fuses: (Fig. 14)

There are 4 fuses. Each one is labeled to describe each fuses function.

© 2009 General Binding Corporation an ACCO Brands CO. Page 13