![Lower Tension Idler: (Fig.8A&9A)](/images/new-backgrounds/81520/8152023x1.webp)
GBC
FIGURE 8
FIGURE 9
FIGURE 10
FIGURE 11
Operation Manual
Lower Tension Idler: (Fig.8A&9A)
The Lower Tension Idler Guides the lower lamination onto the Bottom Main Roller insuring a constant amount of wrap on the Bottom Main Roller.
Unwind Brake Tensioner:
The Unwind Brake Tensioner (Fig.8B) is used to adjust the amount of brake that is being applied to the film or media.
Supply Shaft:
The Supply Shaft (Fig.8C&9A) is used to hold film to be used, and to apply brake tension.
Core Chuck:
Unwind Brake Tensioner:
The Unwind Brake Tensioner (Fig.10A) is used to adjust the amount of brake that is being applied to the film or media.
Cooling Fan Bridge: (Fig.11A)
There are 3 internal Cooling Fans. The fans can be used to cool down media while it passes through the Main Rollers and into the Pull Rollers.
Rewind Tubes:
The Rewind Tubes (Fig.11B) are used to rewind release liners or finished Medias.
© 2009 General Binding Corporation an ACCO Brands CO. | Page 12 |