Accton Technology ES3002-TF manual Transmit TX Indicates outgoing traffic traversing the port

Fast SwitcHub-2se User’s Guide

Transmit (TX) - Indicates outgoing traffic traversing the port.

LED Activity	Condition
BLINKING LIGHT	ON
NO LIGHT	OFF

Indication

Indicates the port is transmitting packets; blinking is proportional to the traffic passing through the port.

No packets are being transmitted from this port.

Receive (RX) - Indicates incoming traffic entering the port.

LED Activity

BLINKING LIGHT

NO LIGHT

Condition

ON

OFF

Indication

Indicates the port is receiving packets; blinking is proportional to the traffic passing through the port.

No packets are being received on this port.

Full-Duplex(Full) - Indicates that communications have been set to full-duplex operation for the indicated port.

LED Activity

STEADY LIGHT

NO LIGHT

Condition

ON

OFF

Indication

Port is set for full-duplex operation.

Port is set for half-duplex operation.

Note: Full-duplex operation only applies to point-to-point access (e.g., when attaching the SwitcHub to a server or to a workstation). When connecting the SwitcHub to other compatible switches or hubs, use a standard cascaded connection.

100Mbps (100) - Indicates that communications have been set to 100Mbps. (The transmission speed for any device directly attached to the SwitcHub is automatically sensed at 10Mbps or 100Mbps.)

LED Activity

STEADY LIGHT

NO LIGHT

Condition

ON

OFF

Indication

Port is set for 100Mbps connection.

Port is set for 10Mbps connection.

For example, this display shows both ports linked to the network, currently transmitting and receiving traffic at half-duplex. Port 1 is set at 10Mbps and Port 2 is set at 100 Mbps.

Hardware Reference 3-9