Remove HDD/BIOS Password Utilities
This section provide you with removing HDD/BIOS password method:
Remove HDD Password:
If you key in the wrong HDD password three times, an error is generated.
To reset the HDD password, perform the following steps:
1.After the error is displayed, select the Enter Unlock Password option on the screen.
2.An Encode key is generated for unlocking utilities. Note down this key.
3.Execute the UnlockHD.EXE file to create the unlock code in DOS Mode using the format UnlockHD [Encode code] with the code noted in the previous step, as follows:
UnlockHD 76943488
4.The command generates a password which can be used for unlocking the HDD.
Password : 46548274
5.Key in the password from the previous step to unlock the HDD as shown.
Chapter 2 | 39 |
