129
Checkpoint Code | Description |
|
|
84h | Locked key checking is over. Checking for a |
| memory size mismatch with CMOS RAM data next. |
|
|
85h | The memory size check is done. Displaying a soft |
| error and checking for a password or bypassing |
| WINBIOS Setup next. |
|
|
86h | The password was checked. Performing any |
| required programming before WINBIOS Setup |
| next. |
|
|
87h | The programming before WINBIOS Setup has |
| completed. Uncompressing the WINBIOS Setup |
| code and executing the AMIBIOS Setup or WINBIOS |
| Setup utility next. |
|
|
88h | Returned from WINBIOS Setup and cleared the |
| screen. Performing any necessary programming |
| after WINBIOS Setup next. |
|
|
89h | The programming after WINBIOS Setup has |
| completed. Displaying the power on screen |
| message next. |
|
|
8Bh | The first screen message has been displayed. The |
| <WAIT...> message is displayed. Performing the PS/ |
| 2 mouse check and extended BIOS data area |
| allocation check next. |
|
|
8Ch | Programming the WINBIOS Setup options next. |
|
|
8Dh | The WINBIOS Setup options are programmed. |
| Resetting the hard disk controller next. |
|
|
8Fh | The hard disk controller has been reset. |
| Configuring the floppy drive controller next. |
|
|
91h | The floppy drive controller has been configured. |
| Configuring the hard disk drive controller next. |
|
|
95h | Initializing the bus option ROMs from C800 next. |
| See page 131 for additional information. |
|
|
96h | Initializing before passing control to the adaptor |
| ROM at C800. |
|
|
