Acer G300 Series manual Configuring IDE Software RAID

112		5 Configuring IDE Software RAID
	Status	Displays the health of the array. The array health status can be
		one of the following:
		On Line - Working within normal parameters.
		Off Line - All drives have failed.
		Deteriorated - One of the drives has failed.
	Logical Drive	Displays the logical drive letters or volume names.
	Stripe Size	Displays the stripe size. A stripe size is the minimal amount of
		data that can be written to the drive in one write.
		Note: RAID level 1 does not have a stripe size parameter. Stripe
		size parameters are available for RAID level 0 and RAID level 10
		array sets only. The stripe size parameter can be set only when
		the array is created. See the user’s guide for your IDE Software
		RAID IDE controller for more information.
	Capacity	Displays the actual size of the array. This size is reported to
		Operating System.
	Error Threshold	This parameter is user defined. Users can define the error
		threshold on each drive. For more information on how to set
		the error threshold, see the Advanced menu description.
	Constituent Physical	Displays the physical drives joined to an array.
	Drives

To exit this page, click on Config View or Scan Devices.