96 | 5 Configuring IDE Software RAID |
Using IDE Software RAID Configu- ration Console
This section describes the IDE Software RAID Configuration Console software utility. You can use the software utilities that come with IDE Software RAID configuration console to perform the following actions.
•Get information about the configuration
•Track the health of the array and physical drives
•Track S.M.A.R.T. status of the physical drives
•Rebuild an array
•Perform a consistency check on an array
•Check error log where all drive failures are reported
IDE Software RAID Configuration Console
To log onto the RAID Server, enter the Internet address in the Internet browser. The following screen displays.
The internet address should be http://localhost:555
