xi
Setup submenu: Exit | 76 |
Auto Configuration with Optimal Settings | 76 |
Auto Configuration with | 77 |
5 Configuring IDE Software RAID | 79 |
Configuration Strategies | 81 |
Assigning RAID Levels | 81 |
Selecting a RAID Level | 82 |
Configuring Arrays | 83 |
Using the IDE Software RAID Setup Utility | 84 |
Auto Configure Stripe (F1) | 85 |
Auto Configure Mirror (F2) | 85 |
Auto Configure RAID 10 (F3) | 86 |
Create Array (F4) | 86 |
Delete Array (F5) | 88 |
Restore Old Configuration (F6) | 88 |
Save and Exit (F10) | 88 |
Installing Windows NT 4.0 and Windows 2000 Drivers 89 | |
Updating the Windows NT 4.0 or Windows 2000 Driver89 | |
Confirming the Windows NT 4.0 or Windows 2000 |
|
Driver Installation | 90 |
Supported Internet Browsers | 91 |
Installation Steps for Windows | 91 |
IDE Software RAID Configuration Console | 96 |
Config View | 101 |
RAID Controller Properties | 102 |
Property Description | 103 |
Physical Drive | 104 |
Array | 106 |
Log Data | 113 |
Advanced | 114 |
Backplane | 116 |
Appendix A: AMIBIOS |
|
POST Checkpoint Codes | 119 |
AMIBIOS POST Checkpoint Codes | 121 |
Uncompressed Initialization Codes | 121 |
POST Checkpoint Codes | 122 |
Bootblock Recovery Codes | 122 |
Uncompressed Initialization Codes | 123 |
Bus Checkpoint Codes | 131 |
Additional Bus Checkpoints | 132 |
High Byte | 132 |
