6.2Installation Steps
The MegaRAID SCSI
Table 6.1 lists the hardware installation steps. Each step is described in detail in the following pages.
Table 6.1 | Hardware Installation Steps |
| |
|
|
| |
Step | Action | Additional Information | |
|
|
| |
1 | Unpack the MegaRAID controller and | If damaged, call your LSI | |
| inspect for damage. Make sure all items | Logic OEM support | |
| are in the package. | representative. | |
|
|
| |
2 | Turn the computer off and remove the |
| |
| cover. |
|
|
|
|
| |
3 | Check the jumper settings on the | ||
| MegaRAID SCSI | MegaRAID SCSI | |
|
|
| jumper settings. |
|
|
| |
4 | Install the MegaRAID SCSI |
| |
|
|
| |
5 | Replace the computer cover and turn the | Be sure the SCSI devices | |
| power on. | are powered up before or | |
|
|
| at the same time as the |
|
|
| host computer. |
|
|
| |
6 | Run MegaRAID BIOS Configuration Utility. | Optional. | |
|
|
| |
7 | Install software drivers for the desired |
| |
| operating systems. |
| |
|
|
|
|
6.2.1Step 1: Unpack
Unpack and install the hardware in a
Copyright © 2002 by LSI Logic Corporation. All rights reserved.