7.2BIOS Boot Error Messages
Table 7.2 describes error messages that can display when you boot the system, and suggested solutions.
Table 7.2 | BIOS Boot Error Messages |
| ||
|
|
|
| |
Message |
| Problem | Suggested Solution | |
|
|
| ||
Adapter BIOS Disabled. | The MegaRAID BIOS is | Enable the BIOS using the MegaRAID BIOS | ||
No Logical Drives | disabled. Sometimes the | Configuration Utility. | ||
Handled by BIOS | BIOS is disabled to |
| ||
|
| prevent booting from the |
| |
|
| BIOS. |
| |
|
|
| ||
Host Adapter at | The BIOS cannot | Make sure MegaRAID SCSI | ||
Baseport xxxx Not | communicate with the | installed. | ||
Responding |
| adapter firmware. |
| |
|
|
| ||
No MegaRAID SCSI | The BIOS cannot | Make sure MegaRAID SCSI | ||
communicate with the | installed. | |||
|
| adapter firmware. |
| |
|
|
| ||
Configuration of | The configuration stored | 1. Press a key to run MegaRAID Manager. | ||
nonvolatile RAM | in the MegaRAID SCSI | 2. Select View/Add Configuration from the | ||
(NVRAM) and drives | Configure menu. | |||
mismatch. |
| match the configuration | 3. Use View/Add Configuration to examine | |
Run View/Add | stored in the drives. | |||
both the configuration in NVRAM and the | ||||
Configuration option of |
| |||
| configuration stored on the disk drives. | |||
Configuration Utility. |
| |||
| 4. Resolve the problem by selecting one of the | |||
Press any key to run the |
| |||
| configurations. | |||
Configuration Utility. |
| |||
|
| |||
|
|
| ||
1 Logical Drive Failed | A logical drive failed to | Make sure all physical drives are properly | ||
|
| sign on. | connected and are powered on. | |
|
|
| Run MegaRAID Manager to find out if any | |
|
|
| physical drives are not responding. Reconnect, | |
|
|
| replace, or rebuild any drive that is not | |
|
|
| responding. | |
|
|
| ||
X Logical Drives | x number of logical | Make sure all physical drives are properly | ||
Degraded |
| drives signed on in a | connected and are powered on. | |
|
| degraded state. | Run MegaRAID Manager to find if any physical | |
|
|
| ||
|
|
| drives are not responding. Reconnect, replace, | |
|
|
| or rebuild any drive that is not responding. | |
|
|
|
|
BIOS Boot Error Messages |
Copyright © 2002 by LSI Logic Corporation. All rights reserved.